Biorb 60 Swap Tops

Bored with the colour of your biOrb? Doesn’t match your new colour scheme? Wouldn’t it be better if the lid and base were a different colour?

Lid and base sets called Swap Tops are available in all eight colours, from Swell UK, so you can change the look of your biOrb whenever you want.

FITTING INSTRUCTIONS biOrb MUST be empty

• Switch off air pump and disconnect airline. Remove lid and filter cartridge assembly.
• Ensuring biOrb is empty (no water or ceramic media), turn upside down taking care not to damage. Raise airline out of channel in base. Do not disconnect airline from biOrb centre.
• Remove original base by placing fingers under the rim and pull upward.

Tip: If cold, gentle heat may be necessary to make the base more flexible for removal and refitting. A hair dryer set on low heat is ideal; do not overheat.

Warning: do not attempt to prise off using other objects, this will damage the biOrb.

• place the new coloured base in position aligning the notch in the base. Hold the base in position at the notch with one hand. Using the other hand press down firmly on the inside circular edge of the base until it snaps on under the central lip.

Ensure new base is clipped properly and fitted as original.

• Refit airline into channel and turn biOrb upright. Activate biOrb as per instructions in the Activation Guide.