Bondaglass Fibre Glass Repair Kit

Bondaglass Glass-Fibre Repair Kit is a multi purpose Bonda Glass kit that is perfect for fibre glass ponds. It's is also exceptionally versatile, since it is designed for a range of materials including GRP, metal, wood, concrete and brick. It will also bond to some plastics, however it will not bond to PVC or rubber.

Overview:

The Kockney Koi Glass-Fibre Repair Kit can be used to repair permanently, holes, cracks, and splits in fibre glass ponds.

Bonda Resin only requires the addition of an easy to mix liquid hardener to be ready to use with Bonda Glass Fibre Mat. When using glass fibre always fray out the edges of any joints so that the overlaps are strong and undetectable.

It can be used on plastics but not the oily types and will dissolve polystyrene.

Glass Fibre is whitish in the pack but when the resin impregnates the glass it becomes translucent making it easier to stipple into place. When applying the resin always use a stippling action. When applying several layers ensure that all the air is driven out of the laminate by stippling vigorously.

It is preferable to apply the resin and glass fibre 'wet on wet' although it will bond perfectly to a cured laminate. It is always best to work with small pieces until experienced.

Process:

• Make sure the surface is clean, dry and free of grease and oil. If necessary sand with a medium grade sandpaper.
• Ensure the ambient temperature is above 10C (50F).
• Prepare all materials required for the job.
• Apply a coat of catalysed resin to the desired area.
• Apply a layer of glass fibre to the desired area.
• Stipple on more resin, painting the desired area to saturation.
• Apply additional layers as required.
• When hardened, if a smooth surface is required apply a coat of Bondafiller, which can be flattened as required.