Oase Jumping Jets

For a water light show that is truly captivating the Oase Jumping Jets provide a clear, extremely precise water jet staged effect, with intrcately designed lighting programs.

Overview:
The Oase Jumping Jets running light effect and the water jet chopping mechanism ensures a water light show like no other, with single water-light elements appearing to fly through the air.

An extension set can be easily connected to the control unit to enhance the lighting performance. Thanks to the combinable electronics, the pre-set programs of the two Jumping Jets are controlled with one remote control unit.

At a glance:

• Extremely easy installation with a ready-to-connect complete set, including radio remote control with a range of up to 80 metres.
• Control box (12 volt master) with the possibility of connecting an extension set (for synchronous control of a maximum of 2 Jumping Jets)
• Control Box (12 volt master) includes a microprocessor and a receiver unit
• Remote control with permanently programmed combination of light, water patterns, and colours
• Jet length and height can be individually adjusted to your personal tastes
• Suitable for indoor and outdoor use
• 1 inch stainless steel hose clips for fixing hoses in place
• 2 synchronously controlled sets offer versatile set up and design possibilities

For the Jumping Jet Set you require the powerful Oase Neptune 6000 Pump, (Sold Separately). In addition Oase recommends the FM Master 3 garden outlet that is not included in the set.

With the FM Master 3, the Neptune 6000 can be switched on and off, while the length and height of the Jumping Jets can also be adjusted.

It is also recommended that the set be operated with clean water whenever possible. The set can be installed indoors as well as outdoors, however if installed outdoors a position that is protected from wind should be selected.

Please note:

In colder months the Jumping Jet must be stored where it is protected from frost. The jet quality can lessen with poorer water quality and this can result in increased maintenance efforts fro the Jumping Jet.

The Rainbow Star Set Includes:

• 1 x Jumping Jet with solid stainless steel base
• 1 x 12 volt master control box with radio remote control
• 1 x black 1 inch textile hose (4 metres)
• 2 x stainless steel hose clips (1 inch)
• 1 x controller cable
• 1 x Heavy duty power cable (12 volts)

Rainbow Star Extension Set (Sold Separately)

To really enhance your rainbow experience the existing Jumping Jet Set can also be extended by one additional Jumping Jet. The advantage offered by this extension set is that no pump other than the existing Neptune 6000 needs to be connected. It is simply a matter of connecting the additional Jumping Jet into the control box of the primary jet.

The system is easily connected via the existing control box (12 volt Master) that already controls the first Jumping Jet. The extension set can easily be integrated in the existing equipment and only enhances the already spectacular light show.

The Extension Set includes:

• 1 x Jumping Jet with solid stainless steel base
• 1 x Black one inch thick textile hose (5 metres)
• 4 x stainless steel hose clips (1 inch)
• 1 x controller cable
• 1 x power cable (12 volts)
• 1 x Y-distributor