Swell Feature Pumps

A great range of feature pumps for water features and fountains

At a glance...
  • Powerful feature pump for powering water features and fountains
  • Comes with a 10m power cable for easy setup
  • A variety of models to suit all setups

What are Swell Feature Pumps?

Swell Feature Pumps can be used with a variety of water features and garden ornaments to create a plume or spray. Powerful and compact with flow rates up to 6000 lph, these efficient water feature pumps take up minimal space, come with a 10 m cable and can be used both indoors and outdoors.

Key Features:

  • Can be used with a variety of water features
  • Flow rates up to 6000lph
  • Non-corrosive 
  • Thermal-cut off to protect the pump
  • Suitable for fresh and saltwater
  • Adjustable feature pump
  • Up to 8mm solids handling capacity
  • 2 year guarantee

What are the features of Swell Feature Pumps?

These compact feature pumps are relatively cheap to run, providing long lasting performance, but without the large bills. Built with a thermal cut-off to protect the pump, they feature a non-corrosive shaft that is sealed, waterproof and insulated. Suitable for fresh and saltwater, these adaptive water feature pumps are fully submersible. This flow adjustable feature pump, features a non-corrosive shaft and all line parts are sealed, waterproof and insulated. Disassembly and cleaning is easy thanks to its clever design. Feature pumps can become blocked, so it's a good idea to regularly check for any debris, to make sure your pump remains in optimum working condition.

What fittings will I need to install this pump?

You'll need to consider how you'll get power to your pump. To comply with UK electrical legislation, pond appliances (such as pond pumps) can't be supplied with a fitted plug, so you'll need to purchase one separately or wire it into an outdoor socket. A 10 m cable is provided, but these do not come with a fitted plug, to allow you to lengthen the cable with a waterproof connector. You'll also need some ribbed anti-kink pond hose and some hose clips to keep the hose firmly attached to the pump.

What do I need to consider when setting up a water feature?

Water features bring sound and movement to your garden. Things to consider when setting up your water feature are that water features are self-contained and how gravity affects water.

Please note: The impeller in this pump is a consumable part. With this being the only moving part of your pond pump, it is exposed to a lot of friction which can cause it to wear down and break over time. This component is not covered by the guarantee and can be purchased as and when required.



Energy efficiency A
Cable length 10m
Thermal cut off Yes
Solids handling capacity Up to 8mm
Hose size See table
Fitted plug To comply with UK electrical legislation, pond appliances can't be supplied with a fitted plug, so you'll need to purchase one separately or wire it into an outdoor plug socket.
Guarantee 2 years
Internal use Yes
External use Yes



Pump model 1500 2000 3000 4000 5000 6000
Flow Rate 1500lph 2000lph 3000lph 4000lph 5000lph 6000lph
Max head height 2.5m 3m 3.5m 3m 4.5m 5.2m
Power 25W 43W 68W 75W 85W 105W
Hose size 20mm 20mm 20mm 20mm 32mm 32mm
Dimensions 104 x 93 x 140mm 118 x 101 x 158mm 132 x 106 x 172mm 132 x 106 x 172mm 162 x 133 x 209mm 162 x 133 x 209mm


Flow curve charts

Pump model Power Max head height 1m 2m 3m 4m 5m 6m
1500 25W 2.5m 1,000lph 500lph - - - -
2000 43W 3m 1,400lph 700lph - - - -
3000 68W 3.5m 2,500lph 1,700lph 700lph - - -
4000 75W 3m 2,800lph 1,600lph 800lph - - -
5000 85W 4.5m 3,700lph 2,000lph 1,000lph 400lph - -
6000 105W 5.2m 4,500lph 2,900lph 1,800lph 700lph - -
Write Your Own Review
You're reviewing:Swell Feature Pumps
Your Rating